Struct gstreamer::StreamFlags [−]
pub struct StreamFlags { /* fields omitted */ }Methods
impl StreamFlags
impl StreamFlagspub const NONE: StreamFlags
NONE: StreamFlags = StreamFlags{bits: 0,}
pub const SPARSE: StreamFlags
SPARSE: StreamFlags = StreamFlags{bits: 1,}
pub const SELECT: StreamFlags
SELECT: StreamFlags = StreamFlags{bits: 2,}
pub const UNSELECT: StreamFlags
UNSELECT: StreamFlags = StreamFlags{bits: 4,}
pub fn empty() -> StreamFlags
pub fn empty() -> StreamFlagsReturns an empty set of flags.
pub fn all() -> StreamFlags
pub fn all() -> StreamFlagsReturns the set containing all flags.
pub fn bits(&self) -> u32
pub fn bits(&self) -> u32Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u32) -> Option<StreamFlags>
pub fn from_bits(bits: u32) -> Option<StreamFlags>Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: u32) -> StreamFlags
pub fn from_bits_truncate(bits: u32) -> StreamFlagsConvert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
pub fn is_empty(&self) -> boolReturns true if no flags are currently stored.
pub fn is_all(&self) -> bool
pub fn is_all(&self) -> boolReturns true if all flags are currently set.
pub fn intersects(&self, other: StreamFlags) -> bool
pub fn intersects(&self, other: StreamFlags) -> boolReturns true if there are flags common to both self and other.
pub fn contains(&self, other: StreamFlags) -> bool
pub fn contains(&self, other: StreamFlags) -> boolReturns true all of the flags in other are contained within self.
pub fn insert(&mut self, other: StreamFlags)
pub fn insert(&mut self, other: StreamFlags)Inserts the specified flags in-place.
pub fn remove(&mut self, other: StreamFlags)
pub fn remove(&mut self, other: StreamFlags)Removes the specified flags in-place.
pub fn toggle(&mut self, other: StreamFlags)
pub fn toggle(&mut self, other: StreamFlags)Toggles the specified flags in-place.
pub fn set(&mut self, other: StreamFlags, value: bool)
pub fn set(&mut self, other: StreamFlags, value: bool)Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Copy for StreamFlags
impl Copy for StreamFlagsimpl PartialEq for StreamFlags
impl PartialEq for StreamFlagsfn eq(&self, other: &StreamFlags) -> bool
fn eq(&self, other: &StreamFlags) -> boolThis method tests for self and other values to be equal, and is used by ==. Read more
fn ne(&self, other: &StreamFlags) -> bool
fn ne(&self, other: &StreamFlags) -> boolThis method tests for !=.
impl Eq for StreamFlags
impl Eq for StreamFlagsimpl Clone for StreamFlags
impl Clone for StreamFlagsfn clone(&self) -> StreamFlags
fn clone(&self) -> StreamFlagsReturns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)1.0.0[src]
fn clone_from(&mut self, source: &Self)Performs copy-assignment from source. Read more
impl PartialOrd for StreamFlags
impl PartialOrd for StreamFlagsfn partial_cmp(&self, other: &StreamFlags) -> Option<Ordering>
fn partial_cmp(&self, other: &StreamFlags) -> Option<Ordering>This method returns an ordering between self and other values if one exists. Read more
fn lt(&self, other: &StreamFlags) -> bool
fn lt(&self, other: &StreamFlags) -> boolThis method tests less than (for self and other) and is used by the < operator. Read more
fn le(&self, other: &StreamFlags) -> bool
fn le(&self, other: &StreamFlags) -> boolThis method tests less than or equal to (for self and other) and is used by the <= operator. Read more
fn gt(&self, other: &StreamFlags) -> bool
fn gt(&self, other: &StreamFlags) -> boolThis method tests greater than (for self and other) and is used by the > operator. Read more
fn ge(&self, other: &StreamFlags) -> bool
fn ge(&self, other: &StreamFlags) -> boolThis method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
impl Ord for StreamFlags
impl Ord for StreamFlagsfn cmp(&self, other: &StreamFlags) -> Ordering
fn cmp(&self, other: &StreamFlags) -> OrderingThis method returns an Ordering between self and other. Read more
fn max(self, other: Self) -> Self1.21.0[src]
fn max(self, other: Self) -> SelfCompares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self1.21.0[src]
fn min(self, other: Self) -> SelfCompares and returns the minimum of two values. Read more
impl Hash for StreamFlags
impl Hash for StreamFlagsfn hash<__H: Hasher>(&self, state: &mut __H)
fn hash<__H: Hasher>(&self, state: &mut __H)Feeds this value into the given [Hasher]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher, 1.3.0[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher, Feeds a slice of this type into the given [Hasher]. Read more
impl Debug for StreamFlags
impl Debug for StreamFlagsimpl Binary for StreamFlags
impl Binary for StreamFlagsimpl Octal for StreamFlags
impl Octal for StreamFlagsimpl LowerHex for StreamFlags
impl LowerHex for StreamFlagsimpl UpperHex for StreamFlags
impl UpperHex for StreamFlagsimpl BitOr for StreamFlags
impl BitOr for StreamFlagstype Output = StreamFlags
The resulting type after applying the | operator.
fn bitor(self, other: StreamFlags) -> StreamFlags
fn bitor(self, other: StreamFlags) -> StreamFlagsReturns the union of the two sets of flags.
impl BitOrAssign for StreamFlags
impl BitOrAssign for StreamFlagsfn bitor_assign(&mut self, other: StreamFlags)
fn bitor_assign(&mut self, other: StreamFlags)Adds the set of flags.
impl BitXor for StreamFlags
impl BitXor for StreamFlagstype Output = StreamFlags
The resulting type after applying the ^ operator.
fn bitxor(self, other: StreamFlags) -> StreamFlags
fn bitxor(self, other: StreamFlags) -> StreamFlagsReturns the left flags, but with all the right flags toggled.
impl BitXorAssign for StreamFlags
impl BitXorAssign for StreamFlagsfn bitxor_assign(&mut self, other: StreamFlags)
fn bitxor_assign(&mut self, other: StreamFlags)Toggles the set of flags.
impl BitAnd for StreamFlags
impl BitAnd for StreamFlagstype Output = StreamFlags
The resulting type after applying the & operator.
fn bitand(self, other: StreamFlags) -> StreamFlags
fn bitand(self, other: StreamFlags) -> StreamFlagsReturns the intersection between the two sets of flags.
impl BitAndAssign for StreamFlags
impl BitAndAssign for StreamFlagsfn bitand_assign(&mut self, other: StreamFlags)
fn bitand_assign(&mut self, other: StreamFlags)Disables all flags disabled in the set.
impl Sub for StreamFlags
impl Sub for StreamFlagstype Output = StreamFlags
The resulting type after applying the - operator.
fn sub(self, other: StreamFlags) -> StreamFlags
fn sub(self, other: StreamFlags) -> StreamFlagsReturns the set difference of the two sets of flags.
impl SubAssign for StreamFlags
impl SubAssign for StreamFlagsfn sub_assign(&mut self, other: StreamFlags)
fn sub_assign(&mut self, other: StreamFlags)Disables all flags enabled in the set.
impl Not for StreamFlags
impl Not for StreamFlagstype Output = StreamFlags
The resulting type after applying the ! operator.
fn not(self) -> StreamFlags
fn not(self) -> StreamFlagsReturns the complement of this set of flags.
impl Extend<StreamFlags> for StreamFlags
impl Extend<StreamFlags> for StreamFlagsfn extend<T: IntoIterator<Item = StreamFlags>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = StreamFlags>>(&mut self, iterator: T)Extends a collection with the contents of an iterator. Read more
impl FromIterator<StreamFlags> for StreamFlags
impl FromIterator<StreamFlags> for StreamFlagsfn from_iter<T: IntoIterator<Item = StreamFlags>>(iterator: T) -> StreamFlags
fn from_iter<T: IntoIterator<Item = StreamFlags>>(iterator: T) -> StreamFlagsCreates a value from an iterator. Read more
impl StaticType for StreamFlags[src]
impl StaticType for StreamFlagsfn static_type() -> Type[src]
fn static_type() -> TypeReturns the type identifier of Self.
impl<'a> FromValueOptional<'a> for StreamFlags[src]
impl<'a> FromValueOptional<'a> for StreamFlagsunsafe fn from_value_optional(value: &Value) -> Option<Self>[src]
unsafe fn from_value_optional(value: &Value) -> Option<Self>impl<'a> FromValue<'a> for StreamFlags[src]
impl<'a> FromValue<'a> for StreamFlagsunsafe fn from_value(value: &Value) -> Self[src]
unsafe fn from_value(value: &Value) -> Selfimpl SetValue for StreamFlags[src]
impl SetValue for StreamFlagsAuto Trait Implementations
impl Send for StreamFlags
impl Send for StreamFlagsimpl Sync for StreamFlags
impl Sync for StreamFlags