Struct gstreamer::SeekFlags

pub struct SeekFlags { /* fields omitted */ }

Methods

impl SeekFlags

pub const NONE: SeekFlags

NONE: SeekFlags = SeekFlags{bits: 0,}

pub const FLUSH: SeekFlags

FLUSH: SeekFlags = SeekFlags{bits: 1,}

pub const ACCURATE: SeekFlags

ACCURATE: SeekFlags = SeekFlags{bits: 2,}

pub const KEY_UNIT: SeekFlags

KEY_UNIT: SeekFlags = SeekFlags{bits: 4,}

pub const SEGMENT: SeekFlags

SEGMENT: SeekFlags = SeekFlags{bits: 8,}

pub const TRICKMODE: SeekFlags

TRICKMODE: SeekFlags = SeekFlags{bits: 16,}

pub const SKIP: SeekFlags

SKIP: SeekFlags = SeekFlags{bits: 16,}

pub const SNAP_BEFORE: SeekFlags

SNAP_BEFORE: SeekFlags = SeekFlags{bits: 32,}

pub const SNAP_AFTER: SeekFlags

SNAP_AFTER: SeekFlags = SeekFlags{bits: 64,}

pub const SNAP_NEAREST: SeekFlags

SNAP_NEAREST: SeekFlags = SeekFlags{bits: 96,}

pub const TRICKMODE_KEY_UNITS: SeekFlags

TRICKMODE_KEY_UNITS: SeekFlags = SeekFlags{bits: 128,}

pub const TRICKMODE_NO_AUDIO: SeekFlags

TRICKMODE_NO_AUDIO: SeekFlags = SeekFlags{bits: 256,}

pub fn empty() -> SeekFlags

Returns an empty set of flags.

pub fn all() -> SeekFlags

Returns the set containing all flags.

pub fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: u32) -> Option<SeekFlags>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub fn from_bits_truncate(bits: u32) -> SeekFlags

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub fn intersects(&self, other: SeekFlags) -> bool

Returns true if there are flags common to both self and other.

pub fn contains(&self, other: SeekFlags) -> bool

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: SeekFlags)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: SeekFlags)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: SeekFlags)

Toggles the specified flags in-place.

pub fn set(&mut self, other: SeekFlags, value: bool)

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Copy for SeekFlags

impl PartialEq for SeekFlags

fn eq(&self, other: &SeekFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &SeekFlags) -> bool

This method tests for !=.

impl Eq for SeekFlags

impl Clone for SeekFlags

fn clone(&self) -> SeekFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialOrd for SeekFlags

fn partial_cmp(&self, other: &SeekFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &SeekFlags) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &SeekFlags) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &SeekFlags) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &SeekFlags) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Ord for SeekFlags

fn cmp(&self, other: &SeekFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl Hash for SeekFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where     H: Hasher,

Feeds a slice of this type into the given [Hasher].

impl Debug for SeekFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Binary for SeekFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Octal for SeekFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl LowerHex for SeekFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl UpperHex for SeekFlags

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl BitOr for SeekFlags

type Output = SeekFlags

The resulting type after applying the | operator.

fn bitor(self, other: SeekFlags) -> SeekFlags

Returns the union of the two sets of flags.

impl BitOrAssign for SeekFlags

fn bitor_assign(&mut self, other: SeekFlags)

Adds the set of flags.

impl BitXor for SeekFlags

type Output = SeekFlags

The resulting type after applying the ^ operator.

fn bitxor(self, other: SeekFlags) -> SeekFlags

Returns the left flags, but with all the right flags toggled.

impl BitXorAssign for SeekFlags

fn bitxor_assign(&mut self, other: SeekFlags)

Toggles the set of flags.

impl BitAnd for SeekFlags

type Output = SeekFlags

The resulting type after applying the & operator.

fn bitand(self, other: SeekFlags) -> SeekFlags

Returns the intersection between the two sets of flags.

impl BitAndAssign for SeekFlags

fn bitand_assign(&mut self, other: SeekFlags)

Disables all flags disabled in the set.

impl Sub for SeekFlags

type Output = SeekFlags

The resulting type after applying the - operator.

fn sub(self, other: SeekFlags) -> SeekFlags

Returns the set difference of the two sets of flags.

impl SubAssign for SeekFlags

fn sub_assign(&mut self, other: SeekFlags)

Disables all flags enabled in the set.

impl Not for SeekFlags

type Output = SeekFlags

The resulting type after applying the ! operator.

fn not(self) -> SeekFlags

Returns the complement of this set of flags.

impl Extend<SeekFlags> for SeekFlags

fn extend<T: IntoIterator<Item = SeekFlags>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

impl FromIterator<SeekFlags> for SeekFlags

fn from_iter<T: IntoIterator<Item = SeekFlags>>(iterator: T) -> SeekFlags

Creates a value from an iterator.

impl StaticType for SeekFlags

fn static_type() -> Type

Returns the type identifier of Self.

impl<'a> FromValueOptional<'a> for SeekFlags

unsafe fn from_value_optional(value: &Value) -> Option<Self>

impl<'a> FromValue<'a> for SeekFlags

unsafe fn from_value(value: &Value) -> Self

impl SetValue for SeekFlags

unsafe fn set_value(value: &mut Value, this: &Self)